MAKE A MEME View Large Image Floyd rose pro parts.jpg in an article of figure <br/> Saddle ” A metal box the string is locked into There is one saddle for each string hence six for the standard 6-string guitars and seven for 7-string guitars Each saddle contains a long ...
View Original:Floyd rose pro parts.jpg (585x445)
Download: Original    Medium    Small Thumb
Courtesy of:commons.wikimedia.org More Like This
Keywords: Floyd rose pro parts.jpg in an article of figure <br/> Saddle � A metal box the string is locked into There is one saddle for each string hence six for the standard 6-string guitars and seven for 7-string guitars Each saddle contains a long screw that fixes the string holder block inside it An Allen wrench is required to loosen or tighten these String Holder Block or Saddle Block � A cube-shaped metal block that presses the string end into the saddle wall thus locking it tight Intonation Screws � Screws that hold saddles on the base plate; when loose the saddles can be moved forward and backward effectively changing intonation of a string An Allen wrench is required to loosen or tighten these Fine Tuners � Screws that are used to fine-tune strings instead of the machine heads which cannot be used after the nut has locked the strings at the neck It can be rotated with bare hands Vibrato/Tremolo Arm � The most visible part of mechanism a handle that can be used to change played notes pitch up and down during play Nut � A string clamp installed as the zero fret at the neck It has screws and braces called locks to clamp on the strings that run through it An Allen wrench is required to loosen or tighten the nut String Retainer � A metal bar installed at headstock to retain strings that go to the machine heads Springs � Springs that pull the bridge downward around the pivot point balancing the string tension They are installed into a cavity that is usually accessible from behind the guitar body and is hidden under plastic cover There are usually 3 springs However to change the resistance of arm to more comfortable one some guitarists may use anything from 1 to 5 springs Spring Claw Hook � A connector between the guitar body and springs It has special claws to attach the springs to This part is usually mounted to the guitar body using long screws that can be adjusted to change the tension of springs and thus re-balance the whole tremolo system Allen wrenches � Three sizes are usually supplied with the tremolo The smallest is used for intonation screws; the mid-sized wrench is used for fixing screws on saddle blocks and the largest is for nut screws Floyd Rose Licensed systems usually supplies and uses only two sizes of wrenches as their variation uses the same size for the screws on the saddle blocks and nut However on some models only need the first two as the bridge and nut screws are the same size Floyd Rose Guitar construction Guitar construction schemas Guitar saddles Nuts guitar Diagrams labelled with numbers only
Terms of Use   Search of the Day